Panasonic TH-98SQ1W Operating Instructions Manual page 61

■
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
■
[Main input]
Displays the (main) input set by switching input.
■
[Current input]
Displays whether the input currently in use for viewing
is the (main) input set by switching input or the
backup one.
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
HDMI1
HDMI2
DisplayPort
DVI-D
Backup
SLOT
PC
USB
○: S electable for both Primary and Secondary.
×: Not selectable for neither Primary nor Secondary.
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
Full
Main input
Backup OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
Full
Backup Input
HDMI2
Main
HDMI1
HDMI2
DisplayPort PC USB
DVI-D
SLOT
○ × ×
× × ×
× × ×
When the conditions for the Backup Input function
are met, the following screen is displayed.
Main input
Backup OK
1-2 [Input change mode]: [Normal] detailed
settings
Switches to the backup input if an interruption of
video occurs.
Note
● This function will start operating once a video signal
is detected by both the input in use for viewing and
the backup input and the [Backup input change] item
is displayed as [Active].
■
[Primary backup input]
Sets the first priority backup input.
(None) / [HDMI1] / [HDMI2] / [DisplayPort] /
[DIGITAL LINK] / [DVI-D] / [SLOT] / [PC] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
■
[Secondary backup input]
Sets the second priority backup input.
(None) / [HDMI1] / [HDMI2] / [DisplayPort] /
[DIGITAL LINK] / [DVI-D] / [SLOT] / [PC] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
■
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
■
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
■
[Main input]
Displays the (main) input set by switching input.
61
English