Furuno WR-2100 Operator's Manual page 19

2) Acquisition
Notice: Turn "OFF" all the setting at first.
Rec echo
Turn ON or OFF a Log of echo data.
Rec file type
Select a log form of echo data.
(dat (idx) / ZIP / dat (idx) + ZIP)
Echo folder
Setup a log folder of echo data.
Echo zip folder
Setup a log folder of echo zip data file.
Rec interval [sec]
Setup a recording interval of echo data.
Rec time [hour]
Setup a time of recording echo data.
Screen capture
Turn ON or OFF a screen capture.
Capture folder
Setup a folder of capture (jpg).
Rec interval [sec]
Setup an interval time of capture.
Rec CSV
Turn ON or OFF a recording of CSV data.
Echo folder (CSV)
Setup a folder of CSV data.
CSV Rec interval [sec]
Setup an interval time of CSV data.
3) Antenna
Latitude [deg]
Setup the latitude of the installed point.
Longitude [deg]
Setup the longitude of the installed point.
Altitude [m]
Setup the altitude of the installed point.
Image
Setup a filename of map.
This program treats as the equidistant cylindrical
projection.
Left Top Latitude [deg]
Setup the latitude of left top corner of Map Image.
It indicates during service menu
CSV Rec parameter
Select a weather parameter of recording
CSV.
Rain [mm/h], Zhh [dBz], Zhh_corr [dBz], Zvv
[dBZ], V [m/s], Zdr [dB], Zdr_corr [dB], Kdp
[deg/km], dp [deg], hv, W [m/s]
Multiple parameter output
Turn ON or OFF an output record of
multi-parameter.
(*It could setup only when [Echo data mode]
of [TRX] is applied)
Multiple parameter output folder
Setup a folder of recording multi-parameter
(scn、rhi、sppi、scnd、rhid、sppid).
(*It could setup only when [Echo data mode]
of [TRX] is selected)
Rainfall information output
(*It will indicate during service setting) Turn
ON or OFF an output record of rainfall
information.
Rainfall information output folder
(*It will indicate during service setting)Setup a
folder of recording rainfall information.
12
SSE-14-0022_17