Spirit CRS800 Owner's Manual page 10

STEP 2:
1. Install 2 TRANSPORTATION WHEELS (86) with 2 BUTTON HEAD SOCKET BOLTS (161) and
2 NYLOC NUTS (121).
2. Place the CONSOLE MAST (2) through the CONSOLE MAST COVER (76) with the proper
orientation. Allow the console cables to go through the bottom end of the console mast and out
through the top of it.
3. Insert the mast on the MAIN FRAME, and use 2 HEX HEAD BOLTS (160) with 2 SPLIT
WASHERS (163), 2 FLAT WASHERS (128) and 2 NYLOC NUTS (158) to secure on the side.
Then use 2 HEX HEAD BOLTS (159) and 2 CURVED WASHERS (162) to secure at the front and
back of tube.
4. Plug in the END CAPS (64) on OVAL STABILIZER TUBES.
HARDWARE
#121. 5/16" × 6T_
Nyloc Nut (2 pcs)
#160. 3/8" × 2-1/2"_
Hex Head Bolt (2 pcs)
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
#128. 3/8" ×19 × 1.5T_
Flat Washer (2 pcs)
#161. 5/16" × 1-3/4"_Button
Head Socket Bolt (2 pcs)
#158. 3/8" × 7T_
Nyloc Nut (2 pcs)
Ø
#162. 8 × 23 × 1.5T_
Curved Washer (2 pcs)
9
#159. M8 × 16L_
Hex Head Bolt (2 pcs)
#163. 3/8" x 2T_
Split Washer (2 pcs)
Dyaco Canada Inc. 2016