Stack Slide Hp Sensor - Canon imageRUNNER iR2270 Service Manual

Chapter 3

3.4.7 Stack Slide HP Sensor

3.4.7.1 Removing the
PCB Cover
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[3]
[2]
F-3-160
3) Remove the 2 screws [1] and detach the
PCB cover [2].
[1]
]
F-3-161
3-48
3.4.7.2
1) Remove the 3 screws [1], release the 2
hooks [2], and then detach the top harness
0008-1168
cover [3].
[2]
[1]
F-3-162
3.4.7.3
1) Remove the screw [1] on the back of the
finisher and detach the top cover (rear) [2].
Removing the
Top Harness Cover
[3]
Removing the
Upper Cover
0008-1183
[1]
[1]
0008-1190