Removing The Pcb Cover; Feed Motor; Stack Tray Shift Motor - Canon imageRUNNER iR2270 Service Manual

Chapter 3
[5]
[4]
F-3-31
3.2.1.7 Removing the

Feed Motor

1) Remove the harness [2] from the guide
[1].
2) Remove the 2 screws [3] and remove the
feed motor [4].
[3]
F-3-32
3-10
[4]
[2]
[3]
[1]
0008-1053
[4]
[2]
[1]

3.2.2 Stack Tray Shift Motor

3.2.2.1 Removing the
PCB Cover
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[3]
[2]
F-3-33
3) Remove the 2 screws [1] and detach the
PCB cover [2].
[1]
]
F-3-34
0008-1579
[1]