Front Turning Point Of The Thread Catcher - Pfaff 3586-25 Series Instruction Manual

13

Front turning point of the thread catcher

.08.05
Rule
When the thread catcher 5 is in the front turning point, the rear edge of the thread catcher
cutout should be 1 mm (1.2 mm on the -25/01) in front of the bobbin case position
fi nger 6.
Fig. 13 - 14
 Swivel the roller lever 1 to the lowest point of the control cam 2.
 Adjust the thread catcher carrier 3 (screw 4) according to the rule.
3
6
5
Adjustment
1
on the -25/02
6
2
4
5
103