Table 5-8. As/3356 Eia-422/V.35 Dip Switch Settings - Comtech EF Data Radyne RCS20 Installation And Operation Manual

RCS20 M:N Redundancy Switch
Electrical Interfaces
5.3.1.1.2 DDS20 Data Switch Module Connectors
5.3.1.1.2.1 J1 | SD (Send Data)
The J1 | SD G.703 Unbalanced Send Data port is a 75 Ohm female BNC Connector.
5.3.1.1.2.2 J2 | DDO (Drop Data Out)
The J2 | DDO Unbalanced Drop Data Out port is a 75 Ohm female BNC Connector.
5.3.1.1.2.3 J3 | IDI (Insert Data In)
The J2 | IDI Unbalanced Insert Data In port is a 75 Ohm female BNC Connector.
5.3.1.1.2.4 J4 | RD (Receive Data)
The J4 | RD Unbalanced Receive Data port is a 75 Ohm female BNC Connector.
5.3.1.1.2.5 J5 | ESC VSC (Escape Audio)
The J5 | ESC VSC Audio Channel/64K Data port is a 9-Pin Type D Female Connector.
Pin No.
1 ESCAUDTX 1A
2 ESCAUDRX 1A
3
4 ESCAUDTX 2B
5 ESCAUDRX 2B
6 ESCAUDTX 1B
7 ESCAUDRX 1B
8 ESCAUDTX 2A

Table 5-8. AS/3356 EIA-422/V.35 DIP Switch Settings

Pin
1
2
3
4
5
6
7
8
Signal Description
Tx Audio 1A
Rx Audio 1A
GND Ground
Tx Audio 2B
Rx Audio 2B
Tx Audio 1B
Rx Audio 1B
Tx Audio 2A
5–15
Setting
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
64K
Direction
Description
Input Tx Data 64K A
Output Rx Data 64K A
Ground
Input Tx Clock 64B
Output Rx Clock 64B
Input Tx Data 64K B
Output Rx Data 64K B
Input Tx Clock 64K A
Revision 15
MN-RCS20 and CD-RCS20
Direction
Input
Output
Output
Output
Input
Output
Output