Locking The Fan Assembly / Storage; Moving The Machine - Schwinn AD7 AirDyne Service Manual

Locking the Fan Assembly / Storage

When the machine is not in use, be sure to lock the Fan
Assembly with the Transport and Immobilization Strap. The
fan assembly should be locked for storage of the machine.
For safe storage of the machine, remove the
batteries and install the Transport and
Immobilization Strap to secure the Resistance Fan.
Place the machine in a secure location away from
children and pets. Be aware that the Pedals,
Handlebars and Resistance Fan are connected and
when any of these parts move, the others do as well.
To lock the Fan Assembly:
1. Move the Pedals so that one Crank Arm is as close as
possible to the Seat Post.
2. Wrap the Transport and Immobilization Strap (T) around
the Crank Arm and the Seat Post and put the end of the
strap through the metal ring. Tighten the strap to prevent
movement of the Pedals and secure the strap.

Moving the Machine

The machine may be moved by one or more persons depending on their physical abilities and capacities.
Make sure that you and others are all physically fit and able to move the machine safely. Use proper safety
precautions and lifting techniques.
1. Secure the Crank Arm to the Seat Post with the Transport
and Immobilization Strap (T).
2. Use the Rear Stabilizer to carefully lift the machine onto
the transport rollers.
Note: Be sure to keep the fan assembly clear of the floor.
3. Push the machine into position.
4. Carefully lower the machine into position.
NOTICE: Be careful when you move the machine. Abrupt
motions can affect the computer operation.
T
5
T