Room Monitor; To Activate - Siemens HIPATH HIPATH 1190 User Manual

Miscellaneous Functions
Step by step
Service Menu
>
*88=BABYPHONE?
Speaker
Speaker
88

Room Monitor

A Room Monitor (Babyphone) uses a telephone hand-
set as a microphone to capture audio signals in a room.

To activate

Press this key.
:
Select and press to confirm.
or
* Enter the code for activating the Room Monitor feature.
8 8
Lift the handset and position it towards the object to be
monitored.
or
Press this key. The LED turns on
Deactivation
Replace the handset.
or
Press this key. The LED turns off.
Room Monitor
... From an Extension
Enter the extension number for the room you want to
monitor (e.g., 11/101).
Wait. The user calls the extension assigned to the fea-
ture to hear the audio signals present.
... from an external telephone
Required: The telephone must be a DTMF telephone
or you must be able to switch it to DTMF . The telephone
is not connected to the system.
Connect to the HiPath 1100. Enter the DISA-MSN num-
ber (ask your Support Technician).
[1] When the Fax/DID module is installed, you can monitor an environ-
ment even from an external telephone. After the answering mes-
sage completes, enter the extension number assigned to the
feature, then enter the extension password (same as the electron-
ic lock).
This cannot be activated for an overflow extension or members of
a Hunt Group.
1