Telephone Reference Information
Passo a passo
*
Service Menu
Speaker
CONSULTATION?
>
Ring Tone?
12
How to use this manual
The steps for programming the system are presented
sequentially in graphic format under the column "Step
by Step" on the left side of each page.
Symbol Explanations:
Lift the handset.
Replace the handset.
Initiate conversation.
,
... Enter numbers, keys, passwords, internal or external
8 8
phone numbers, etc.
u
v
or
Press keys to configure telephone settings.
Press this key.
Press the key with the LED turned on.
Press the blinking LED key.
:
The display shows the function available at the mo-
ment.
To activate the function indicated press .
:
To browse through available functions
press
until the function shows on the display.
Then press
Wait to hear an audible tone through the handset or
speaker.
<<
>>
An extension is calling.
When activating certain functions and procedures, a
long beeping tone means the activation was success-
ful.
When activating certain functions and procedures,
short beeping tones mean the activation failed.
< >
,
:
to confirm your selection.