Siemens HIPATH HIPATH 1190 User Manual page 72

Functions used for Receiving Calls
Step by step
770 (Name)
NEXT?
>
JOIN GROUP?
>
LEAVE GROUP?
>
#=LEAVE ALL GROUPS?
>
#=REJOIN ALL GROUPS?
72
If a name has been stored for this group, it will be dis-
played (if configured by the system's Support Techni-
cian).
or
If an X does not appear, it means that the ringing signal
is disabled.
or
Enter the Call Group number.
•
7 7 0
or
Enter the Hunt Group number.
• 7 8 0
:
Press to confirm. The next number in the group will be
displayed.
or
:
Select and press to confirm.
The ringing signal for the group displayed is enabled.
or
:
Select and press to confirm.
The ringing signal for the displayed group is disabled.
or
:
Select and press to confirm.
The ringing signal for all groups is disabled.
or
Enter the code for "LEAVE ALL GROUPS".
#
or
:
Select and press to confirm.
The ringing signal for all groups is enabled again.
or
* Enter the code for "REJOIN ALL GROUPS ."
to = Call Group (CG);
7 7 9
to 7 8 9 = Hunt Groups (HG);