Silent Monitoring; Urgent Call/Recall When Busy - Siemens HIPATH HIPATH 1190 User Manual

Step by step
>
SILENT MONITOR?
CALL WAITING!
RECALL?
CALL WAITING!

Silent Monitoring

Silent Monitoring allows a user to override a call without
sending a beep (for certain countries only).
Required: There is a conversation in progress at the call
destination.
:
Select and press to confirm.
or
* 9 4 4 Enter the code for Silent Monitoring.
Enter the extension (e.g., 11/101).
Wait. Start monitoring.
Urgent Call/Recall
when Busy
The Urgent Call feature is used when the extension be-
ing called is busy.
Required: The destination called is busy.
Wait a few seconds until the display shows "CALL
WAITING" and the busy signal becomes a ring.
Wait for the call to be answered.
If the configuration has been changed, do the fol-
lowing to reactivate the Urgent Call feature:
:
Press to confirm.
or
* Enter the code for confirming an urgent call.
5 8
Wait a few seconds until the display shows "CALL
WAITING" and the busy signal becomes a ring.
Wait for the call to be answered.
[1] The user must have authorization to use this feature (see Program-
ming an Extension - Silent Monitoring, in the Programming Manu-
al).
Within the system, Silent Monitoring has the same restrictions as
the Conference and Override features.
If the monitoring or the monitored party change status, Silent Mon-
itoring is canceled. This occurs, for example, when a call is placed
on hold.
[2] An urgent call cannot be made when data protection, consultation
or conference features are activated at the extension called.
[3] (See Activating with a Timeout, in the Programming Manual).
Functions used for making calls
1
2
3
35