Comware Software Upgrade Examples; Using Xmodem To Upgrade Software Through The Console Port - HP 10500 Series Configuration Manual

Hide thumbs Also See for 10500 Series:
Table of Contents

Advertisement

BootWare menu
option
Skip Current System
Configuration
Restore to Factory
Default Configuration
To disable password recovery capability:
Step
1.
Enter system view.
2.
Disable password recovery
capability.
When password recovery capability is disabled, you cannot downgrade the software configuration of
the device to a version that does not support the capability through the BootWare menus. You can do so
at the CLI, but the configured BootWare menu password becomes effective again.

Comware software upgrade examples

Using XMODEM to upgrade software through the console port

1.
In the EXTENDED-BOOTWARE menu, enter 2.
The Serial submenu appears:
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is flash
|<1> Download Image Program To SDRAM And Run
|<2> Update Main Image File
|<3> Update Backup Image File
|<4> Download Files(*.*)
|<5> Modify Serial Interface Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-5):
2.
In the Serial submenu, enter 5.
===============================<BAUDRATE SET>=============================
|Note:'*'indicates the current baudrate
|
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)*
|<2> 19200
|<3> 38400
Password
recovery
enabled
Yes
No
Change The HyperTerminal's Baudrate Accordingly
Password
recovery
Tasks that can be performed
disabled
Skip the configuration file at the next startup.
This is a one-time operation. It takes effective only
No
for the first system boot or reboot after you choose
this option.
This option does not delete the configuration file.
Delete the next-startup configuration file and load
Yes
the factory-default configuration.
Command
system-view
undo password-recovery enable
286
Remarks
N/A
By default, password recovery
capability is enabled.
|
|
|
|
|
|
|
|
|
|
|
|

Advertisement

Table of Contents
loading

Table of Contents