HP 10500 Series Configuration Manual page 264

Enter your choice(0-5):
Table 22 Serial submenu options
Option
<1> Download Image Program To
SDRAM And Run
<2> Update Main Image File
<3> Update Backup Image File
<4> Download Files(*.*)
<5> Modify Serial Interface Parameter
<0> Exit To Main Menu
NOTE:
To set the current storage medium, see
2. Enter 5 in the serial submenu to change the baud rate.
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate
| Change The HyperTerminal's Baudrate Accordingly
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)*
|<2> 19200
|<3> 38400
|<4> 57600
|<5> 115200
|<0> Exit
============================================================================
Enter your choice(0-5):1
3. Enter an appropriate baud rate option. For example, enter 5 to set the baud rate to 115200 bps.
For faster file transfer, change the default baud rate to a higher value before downloading
Comware software with XMODEM through the console port.
4. Enter 0 to return to the Serial submenu.
5. Choose an option from 1 to 3. For example, to upgrade the main Comware software images, enter
2.
6. On the configuration terminal, configure the communication settings and transfer the upgrade file.
For more information, see
In this example, the system sets the file as a main software image file when the file transfer is
complete. The following is the sample output:
Waiting ...CCC
Task
Load and run Comware software images in SDRAM.
This option is not available if password recovery capability is
disabled.
Download Comware software images to the current storage
medium as main images (the file attribute is set to M).
As a result, the M file attribute of the original main images is
removed.
Download Comware software images to the current storage
medium as backup images (the file attribute is set to B).
As a result, the B file attribute of the original backup images is
removed.
Download files to the current storage medium.
Change the baud rate of the console port.
Return to the EXTENDED-BOOTWARE menu.
"Managing storage
"Using XMODEM to upgrade software through the console
254
media."
|
|
|
|
|
|
|
|
port."