Using The Extended Assistant Menu - HP 10500 Series Configuration Manual

Table 37 DEVICE CONTROL menu options
Option
<1> Display All Available Nonvolatile
Storage Device(s)
<2> Set The Operating Device
<3> Set The Default Boot Device
<0> Exit To Main Menu

Using the EXTENDED ASSISTANT menu

1. In the EXTENDED-BOOTWARE menu, press Ctrl+Z to enter the EXTENDED ASSISTANT menu.
=========================<EXTENDED ASSISTANT MENU>==========================
|<1> Display Memory
|<2> Search Memory
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-2):
2. To view memory information, enter 1, and then provide the memory address and length.
Enter your choice(0-2): 1
Info: Press Ctrl+C to abort or return to EXTENDED ASSISTANT MENU.
Info: Enter the address and length in hexadecimal notation.
Info: Only 4 bytes mode supported.
Enter memory address:80
Enter memory length:2
00000080: 00000000 00000000
3. To search memory for certain data, enter 2, and then provide the start and end addresses and the
value of interest.
Enter your choice(0-2): 2
Info: Press Ctrl+C to abort or return to EXTENDED ASSISTANT MENU.
Info: Enter the address and value in hexadecimal notation.
Info: Only 4 bytes mode supported.
Enter start address:80
Enter end address:90
Enter the value to search for:0000
00000080: 00000000 00000000 00000000 00000000
NOTE:
The device displays and searches for memory information in 4-byte mode. If the memory address you
enter is not a multiple of 4 bytes, the device automatically adjusts it.
Table 38 describes the error messages that might appear when you use the EXTENDED ASSISTANT
menu.
Task
Display all storage media on the MPU you are working with.
Set the current storage medium. All file operations in BootWare
menus are performed on the current storage medium.
Set the default storage medium from which the system will start up.
Return to the EXTENDED-BOOTWARE menu.
283
........
................
|
|
|