Deleting Inactive Software Images; Displaying And Maintaining Issu; Standalone Mode - HP 10500 Series Configuration Manual

If an image is not integral, consistent, or committed, use the install activate, install deactivate, and install
commit commands as appropriate to resolve the issue.
Perform this task in user view.
Task
Verify software images.

Deleting inactive software images

This task permanently deletes inactive image files from the device.
Perform this task in user view.
Task
Delete inactive
software images.

Displaying and maintaining ISSU

Standalone mode

The commands in this section applies to devices in standalone mode.
Execute display commands in any view and reset commands in user view.
Task
Display active software images.
Display backup startup software images.
Display main startup software images.
Display inactive software images.
Display the software images included in
an .ipe file.
Display ongoing ISSU activate and
deactivate operations.
Display ISSU log entries.
Display software image file information.
Command
install verify
Command
•
In standalone mode:
install remove [ slot slot-number ] { filename |
inactive }
•
In IRF mode:
install remove [ chassis chassis-number slot
slot-number ] { filename | inactive }
Command
display install active [ slot slot-number ] [ verbose ]
display install backup [ slot slot-number ] [ verbose ]
display install committed [ slot slot-number ] [ verbose ]
display install inactive [ slot slot-number ] [ verbose ]
display install ipe-info ipe-filename
display install job
display install log [ log-id ] [ verbose ]
display install package { filename | all } [ verbose ]
144
Remarks
This command takes effect for both the parent devices
and PEXs.
Remarks
To delete inactive software
images from a PEX, perform the
following tasks:
•
•
Specify its virtual chassis
number for the
chassis-number argument.
Specify its virtual slot
number for the slot-number
argument. The slot number
is fixed at 0 for the PEX.