Table of Contents
Advertisement
Communicating Via Modem
You can expand your communications by connecting your phone to a com-
puter with a modem.
Connecting Using the Data Cable
Use the data cable provided to connect your phone to a computer.
Making Fax and Data Calls
To be able to use various communication services you also need appropriate
software, for example a fax application, an external fax adapter, an e-mail
application or an Internet browser.
You must have a subscription to these services. Check with your operator. Most
phone network operators require that you have separate fax and data subscrip-
tions.The default setting for the SETTINGS\Data menus is OFF for all phone
modes. ACeS provides separate phone numbers for this service.
When a fax or data call is in progress, the phone display shows the call type,
Fax or Data
Software-Initiated Fax and Data Calls
Fax and data calls are initiated from your computer.
To make a call first do the following:
1
Connect your computer to the phone
Version P1C
2
Start the software application on your computer
3
Follow the software prompts
Note! Make sure that you have selected the phone modem.
If your SIM allows it, you can make speech-then-fax calls. Initiate the speech
part of the call from the CALLS/Speech then fax menu. Then, initiate the fax
transmission.
Communicating Via Modem–ACeS Mode
In ACeS mode you can connect your phone to a computer to send and receive
fax and e-mail messages, browse the Internet and much more.
Data Menus
Some of the features described in this section require that you have the Data
menus in your phone turned on.
To turn Data menus on:
¤
SETTINGS @
¯
Data menu
Press YES again to confirm the setting
If status is ON, press NO to exit the menu
Note: Some features and menus are operator dependent
ACeS OG698 Phone User's Guide
@
1
Display the SETTINGS menu
2
Scroll to Data menus
˘
The current status of ON or OFF is shown
(Off)
If status is OFF
Press YES
Page 63
Advertisement
Table of Contents
