Table of Contents
Advertisement
ACeS OG698 Phone User's Guide
Change Security Codes
1
From the ACCESS menu, select Call cards
security and press YES
2
Enter your security code and press YES
3
Scroll to Change code and press YES
4
Enter your new code and press YES. The code
can consist of four to eight digits
5
Confirm your new code by entering it again
when Repeat new code appears in the dis-
play, and press YES
Your security code is now changed.
Store Credit or Calling Card Numbers
Your phone allows you to store two calling card numbers in the phone book
menu. This submenu is only visible if the Call card function is activated in the
ACCESS menu.
To store a calling card number:
1
From the PHONE BOOK menu, select Call
card numbers and press YES.
Page 50
5
Press the navigation key
6
Enter your calling card server Verification code
The dialing order may vary between calling card servers. If you are required to
dial your verification code before or after the number you wish to dial, you can
switch the order. To change the order, press the * or # key, when the Called no.
row flashes.
Note: Some features and menus are operator dependent
2
Enter your security code and press YES. To
change security codes, see "Changing the Security
Code" on page 73.
3
Select card position (Card 1 or Card 2), using
the navigation key, and press YES.
4
Enter the Access number to the calling card
server. You will later use this number to automati-
cally call your credit card server Enter the num-
bers in the same way as you would in the regular
Phone Book
To store the calling card number, press YES
To change the dialling order, press the navigation key. Called no will
flash in the display. Use the * or # key to change the order.
Version P1C
Advertisement
Table of Contents
