Ericsson ACeS OG698 User Manual page 48

Satellite/gsm 900 cellular phone
Table of Contents

Advertisement

ACeS OG698 Phone User's Guide
To Reject Waiting Call
Press 0 followed by YES to reject the waiting call and continue the current
call. The waiting call is cleared.
If the caller's network supports it, the caller will hear a busy tone.
If Divert On busy is activated, the waiting call is Diverted to the number
you specified.
Switching Between Two Calls
Press YES to switch between the active call and the call on hold.
Ending the Current Call
1
Press NO to end the current call
The message Retrieve held call? appears and a beep sounds
2
Press NO to end the held call, or press YES to return to the held call
If you do not press YES or NO within three seconds, the message Retrieve
held call? disappears from the display. The held call is ended automatically.
Receiving a Third Call
If your Call Waiting function is activated, you may receive a third call when
you are engaged in one call and have a second call on hold. You will hear a
tone and the message Call Wait appears in the display.
Only one call can be on hold at a time. If you wish to accept the third call you
must end one of the existing calls or both.
If you end one of the existing calls:
Page 44
Press YES to accept the waiting call
If you end both calls:
The phone rings and Answer? is displayed
Press YES to answer the waiting call.
To reject the call, press 0 followed by YES
The third call is cleared. If the caller's network supports this function, the
caller will hear a busy tone.
If Divert On busy is activated, the waiting call is Diverted to the number
you specified.
Making a Second Call
While the first call is in progress:
1
Press CLR to clear the display
2
Press YES to put the current call on hold
The message 1 on hold is displayed.
3
Enter the number (or recall it from the phone book)
4
Press YES
Or you may do the following instead:
1
Enter the number you wish to call while the first call is in progress
2
Press YES to put the first call on hold and to make the call.
The message 1 on hold is displayed.
Note: Some features and menus are operator dependent
Version P1C

Advertisement

Table of Contents
loading

Table of Contents