Table of Contents
Advertisement
Satellite Calls without a Full-Strength Signal
You can not make or receive a satellite call if your phone does not lock onto a
signal strong enough to establish full service. If you are receiving a signal but
it is not strong enough to make or receive calls (a half circle is displayed), you
can do the following:
Initiate a call. Position Ant. will display. The
‚
`!
o
call is pending for a short time or until you obtain
Position Ant
full service. The call is placed automatically if full
service is established before the time expires. See
"Point Antenna to Make Call" on page 18.
‹
`!
If you make a call and full service cannot be
o
established Full service unavailable dis-
Full Service
plays and the phone returns to standby. You must
unavailable
reposition the antenna until full service is estab-
lished. See "Point Antenna to Make Call" on
page 18 for more information.
Receive notification of pending calls. However, you can not receive the com-
plete call or reply to it until you establish full satellite service. See "Point
Antenna" on page 17.
Satellite or GSM International Calls
When you make a call to any country different from the one in which you have
your subscription, whether you are in your home country or in a foreign coun-
try, you must use the international format: country code, national destination
code (AREA), and phone number.
Version P1C
To make an international call:
‚
+5555551212
‚
+5555551212
When you are roaming, your phone will automatically search for a valid net-
work. See "Roaming" on page 28.
When you store non-home country numbers in your phone book, be sure to
store them in international formats, + (plus sign), country code, national des-
tination code (area code), then the phone number.
Important! All foreign phone numbers should be dialled as international
numbers no matter what country you are in, either by pressing and holding
down the 0 to generate the international prefix: (+) for the country you are in,
or by entering the prefix using the keypad. This applies to both Satellite and
GSM mode. These numbers should also be stored in international format in
your phone book.
Note! If you dial the international prefix instead of generating the interna-
tional prefix by holding down the + key, the call will go to the home network
on your SIM card. This may not be the home network of the person you are
Note: Some features and menus are operator dependent
ACeS OG698 Phone User's Guide
1
Press and hold the 0 key until the interna-
@
Ø
tional character + is displayed or enter the prefix
Calling
2
Enter the country code, the area code (without
@
Ø
the leading zero) and the phone number and
Calling
press YES, or recall the number from the phone
book
Page 27
Advertisement
Table of Contents
