Table of Contents
Advertisement
ACeS OG698 Phone User's Guide
5
Press #, or scroll with the navigation key to
the equal sign (=) and press YES. to get the
result.
To clear the display, press CLR.
To Enter a Decimal Point, press *.
To multiply, press * twice
Handsfree Calling
You can answer a call and talk to the caller without holding your phone if you
use one of the handsfree options. You can change the default settings for the
handsfree related functions so that they suit your own requirements.
Handsfree Type 1
Handsfree Type 1 lets you talk in semi-duplex mode. In this case, you cannot
speak at the same time the one you are talking to is speaking.
Use this alternative only if the Type 2 does not work properly (which might be
the case in extremely noisy environments).
Handsfree Type 2
This is the standard setting. Handsfree Type 2 lets you talk in full duplex mode.
This considerably increases the speech quality, as you do not have to wait until
your turn to speak.
For Type 2 handsfree to work properly, your phone uses filters that adapt to the
sound environment around the handsfree equipment. The adaptation might
Page 52
take a few calls, and during this learning phase, the person called might hear a
voice echo. However, this echo will disappear after a few calls.
Should the echo persist for a prolonged period, try the Type 1 handsfree
instead.
To Set the Handsfree Type:
¤
SETTINGS @
¯
Select Answer Mode
This menu is available only in GSM mode. The submenu Answering mode
includes two functions: Any key and Auto, which are useful when the phone is
used with handsfree equipment.
The Any Key Function
If the phone is used with handsfree equipment and this function is turned on,
you can answer an incoming call by pressing any key except the NO key.
The Auto Function
If the phone is used with handsfree equipment in automatic answering mode,
an incoming call is automatically answered after one ring signal.
To select Automatic Answering Mode:
Note: Some features and menus are operator dependent
1
Select SETTINGS/Handsfree
@
2
If Type 1 is displayed press YES to toggle the
˘
Handsfree
selection to Type 2. If Type 2 is displayed press
(Type 1)
YES to toggle the selection to Type 1.
3
Press YES to accept the setting displayed
Version P1C
Advertisement
Table of Contents
