Activating/Deactivating Stop Voice Calling; Taking A Call On The Headset; Activating/Deactivating Do Not Disturb - Siemens 300 H Operating Instructions Manual

Step by Step
Service Menu
Switches?
Voice call protect?
Activate?
Deactivate?
Headset
Headset
Service Menu
Activating/deactivating stop voice
calling
You can prevent other persons from making direct calls
to you. Any attempt to address you directly via the loud-
speaker will be changed to a normal call.
Press the key. The lamp lights up.
IJ
Enter the service code.
or
Select and confirm.
Select and confirm.
and
or Confirm.

Taking a call on the headset

Precondition: Your optiset E telephone is equipped
with the optiset E headset/headset plus adapter. The
headset is connected to the adapter. The "headset" key
has been configured.
The lamp flashes when a call is received.
Press the key. Make the call.
Terminating the call:
Press the key. The lamp goes out.

Activating/deactivating do not disturb

If you do not wish to receive incoming calls, you can ac-
tivate the do not disturb facility. Internal callers then
hear busy tone, while external callers are forwarded to
the attendant.System Support can also set up destina-
tions for forwarding internal and external calls, such as
to your mailbox.
Precondition: System Support has enabled the do not
disturb facility for all HiPath 4000 users in your system.
Press the key. The lamp lights up.
Taking calls and setting up calls
19 19 19 19