Terminating A Connection On A Line Key; Entering A Call On A Line (Add-On Conference); Station Override Security; Allowing Override - Siemens 300 H Operating Instructions Manual

Making multi-line and team calls
Step by Step
Speaker
Line
Privacy
Service Menu
72 72 72 72

Terminating a connection on a line key

W
Replace the handset.
or
Press the key which is lit.

Entering a call on a line (add-on conference)

Precondition: There is a call on one of the lines. The
line key lamp is lit.
Press the line key. Conference tone can be heard by you
and by the users who are already connected. All three
parties can now converse with one another. The lamp
remains lit.
Call entering is not possible if the "Privacy" func-
tion has been activated for the line in question.
If one of the three parties replaces the handset,
the other two remain connected to each other.
If the remaining parties are yourself (having en-
tered the call) and the person who originally
seized the line, consultation is no longer possible.

Station override security

Allowing override

Your primary line can be programmed so that no one
can enter the line when it is busy. In this case you can
allow override, but this permission only applies to the
call in progress or to the next call.
You are already engaged in a call on a line.
Q
or Lift the handset.
With the "privacy" key configured:
Press the key.
Via the Service Menu:
Press the key. The lamp lights up.
OO
Enter the service code.
or