Access To The Underside Of The Machine - DURKOPP ADLER 869-M Premium Service Instructions Manual

Working basis
3.4.1
To access the components on the underside of the machine, swivel up
the machine head.
Fig. 5: Tilting the machine head
(1) - Machine head
(2) - Bartack
Tilting the machine head
To tilt the machine head:
1. Lift the lever (3).
2. Tilt the machine head (1) as far as it will go.
Erecting the machine head
To erect the machine head:
1. Erect the machine head (1).
2. Lift the lever (3) and erect the machine head (1) completely.
Service Instructions 869-M PREMIUM - 00.0 - 07/2018

Access to the underside of the machine

For safety reasons, the machine head (1) is stopped by the bolt (2).
(3) - Lever
①
②
③
17