Table of Contents
Advertisement
SIEMENS 5890 DSL Router
User's Guide
PC Configuration
Your PC must be configured to use the TCP/IP protocol suite over the Internet, and to accept Dynamic Host
Configuration Protocol address assignments from the router. Although this is the default settings for the PC, it
is a good idea to verify that they have not been changed.
Each supported PC Operating System varies slightly in how the configuration windows are presented. Select
the Operating System installed on the PC connected to the router from the list below and follow the associated
procedure.
•
Windows 98/ME
•
Windows XP
Windows 98/ME
1. Click Start >Control Panel > Network. This displays the
Configuration tab on the Network window.
2. Select TCP/IP protocol for your network card.
3. Click Properties. This displays the TCP/IP Properties
window.
4. Click the IP Address tab.
5. Ensure that the Obtain an IP address automatically option is selected. This is the default Windows
setting.
6. Click OK to close each dialog.
7. Restart the PC to ensure it obtains an IP address from the router.
8.
Configure the
router.
SIEMENS
•
Windows NT 4
•
Mac OS 9.x
•
Linux OS
Chapter 2 Installation
•
Windows 2000
•
Mac OS X
PC Configuration
8
Advertisement
Table of Contents
