Table of Contents
Advertisement
SIEMENS 5890 DSL Router
User's Guide
Switch Age Time
When a switch receives a message, the originating MAC address and the originating port is saved in the
switch's MAC address table. The switch uses the message's destination MAC address and previous entries in
the MAC address table to select a specific port to use to transmit the message to its destination. Entries remain
in the MAC address table based on the "switch age time". When the age time expires, the port-MAC address
entry is removed from the switch's MAC address table.
To configure Switch Age Time:
1. Click Aging Time Configuration from the left navigation pane of the Switch Status page. This displays the
Switch Aging Time Configuration page.
2. In Aging Time, enter the number of seconds that must pass before the port MAC address entry is
removed from the table. This can be a number between 10 and 100,000.
3. Click Apply.
SIEMENS
Chapter 5 Advanced Setup
Switch Management
58
Advertisement
Table of Contents
