Troubleshooting; Engine Will Not Start; Excessive Engine Vibration; Engine Overheats - Suzuki PE250 Operating Instruction

FUEL SYSTEM
1. Check that the there is sufficient gasoline in the fuel
tank.
2. Make sure the fuelcock lever and fuel tank breather hose
are not clogged.
SPARK PLUG
1. Check that the spark plug gap has not been bridged and
short circuited by carbon.
2. Check that the plug is not fouled with wet gasoline or oil.
3. Clean the spark plug gap and lay the connected spark
plug against the cylinder head. Kick over the engine and
see if a spark is produced. If not, replace the spark plug
or check your ignition system.
4. To check the ignition system, remove the spark plug cap
from the high tension wire and hold it about 7 mm (0.28
in.) from the cylinder head (ground). Kick the engine
over and see if a spark jumps this gap. If so, the system
is functioning and the problem is probably in the spark
plug cap. If this does not produce a spark, have your
SUZUKI dealer check your ignition system.
CLUTCH SLIPPAGE
1. If there is no clutch lever play, adjust the cable adjuster
for 4 mm (0.16 in.l play.
1. Loose engine mou
2. Crack in the frame
ENGH~E OVERHEA
1. Carburetion is le
(main jet selectio
ditions and weath
2. Carbon has collec
crown, cylinder ex
3. The spark plug ha
BAD RUNNING ST
1. Irnproper front or
2. Improper front or
3. Improperly tighte
lock nut.
ENGINE Will NO
SMOOTHLY
1. The carburetor ch
2. Too rich carbureti
3. Clogged air cleane
66