Operating More Than One Handset; Registering/De-Registering More Than One Handsets At The Base Station; Registering A Gigaset 2000S Tango Handset At A Base Station - Siemens Gigaset 2010 Tango Operating Instructions Manual

18.7.99

Operating more than one handset

Operating more than one handset

Registering/de-registering more than one handsets at the base station

Registering a Gigaset 2000S Tango handset at a base station

48
kap15.fm5
You can operate up to six handsets from the Gigaset
2000 Tango family at a Gigaset 2010 Tango base station.
You can only register handsets from the Gigaset
Tango family. It is not possible to register other
Gigaset handsets.
The handset supplied with your telephone is already re-
gistered at the base station with the internal call number
1 and base number 1.
Each additional handset that you purchase must be regis-
tered at the base station. We recommend that when you
are registering other handsets at the base station, to keep
the base number 1 for this base station.
If you want to operate your handset at more
than one base station (up to four) (
you must repeat the following procedure at
each base station.
The handset must be turned off (
Prepare the base station
?
Press the base station paging key until you hear the logon
tone (after approximately ten seconds).
Register the handset
1
The handset is off. Press number of base station.
or 2,3,4
h
Press also this key. The handset is on.
Examples: Registering
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Registering at a base station
1
h
Press and .
Station number
1
N
f
Registering at a 2nd base station
2 h
Press and .
page 48),
page 14)