Reading The Tag Configuration Data; Read Tag Status - Siemens SIMATIC RF310M Operating Instructions Manual

8.5.2

Reading the tag configuration data

You can read the configuration data of a tag by selecting the memory area "CONFIG" in the
editor and subsequently carrying out a read operation. The memory area "CONFIG" only
exists with RF300 tags.
Byte address
0xFF1f
0xFF1e
0xFF1d
0xFF1c
0xFF1b
0xFF1a
0xFF19
0xFF18
0xFF17
0xFF16
0xFF15
0xFF14
8.5.3

Read tag status

You can read and display the status data of the transponder via "Tag > Tag Status".
The following tag status information is displayed here:
● Tag ID
● FRAM memory size in bytes
● Lock bit register (8-bit binary value)
● ASIC version
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
EEPROM
Bank switch (bits 1 and 0)
MDS delay (bits 7:5); LFD (bit 4)
Reserved
Limit value A for LFD quotients
Limit value B for LFD quotients
Reserved
Memory configuration, INIT (bits
7...1)
Range for lock bits
Tag ID, byte 3
Tag ID, byte 2
Tag ID, byte 1
Tag ID, byte 0
SIMATIC RF310M software
8.5 The functions in the "Tag" menu
Functional description
Memory bank
MDS delay/LFD bit
LFD (A)
LFD (B)
Memory configuration/Init bit
Lock bits
Tag ID (b24-b31)
Tag ID (b16-b23)
Tag ID (b8-b15)
Tag ID (b0-b7)
47