Siemens SIMATIC RF310M Operating Instructions Manual page 52

SIMATIC RF310M software
8.6 The functions in the "Extras" menu
1. Enter a password with up to 8 characters under "New Password".
2. Then enter the password again under "Confirm password".
3. Select the "OK" button.
The password is now set. All write functions to a tag as well as exiting of the software are
now protected by this password.
Password prompt
If you then wish to perform a write function, you will be prompted to enter the appropriate
password. You only have to enter the password once in the case of several consecutive
write commands. It will remain valid for 5 minutes after the last write function is executed.
This password is also required to exit the application.
Deactivation of password
If you have assigned a password and then wish to deactivate it, leave the "New Password"
and "Confirm Password" fields empty, and confirm using the "OK" button.
Default password
No password is assigned in the delivery condition.
Note
I forgot my password
If you have forgotten your password, the original status of the device can be restored. See
System reset (Page 92).
52
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader