Configuration Scheme; Table 2-2 Moby Fc Configuration Scheme - Siemens SIMATIC FC 45 Function Manual

2.2

Configuration scheme

2.2
Table 2-2 MOBY FC configuration scheme
Ladder logic
programming box
MOBY FC
Params_DB
Params_ADDR
*) These values are exemplary whenever only data structures of the UDT 10 type are arranged in succession. These
values change if UDT 10 is followed by the MOBY command (UDT 20).
Params_DB and Params_ADDR form a pointer to a data structure. This data structure is
defined by calling UDT 10 (English) or UDT 11 (German). A separate data structure must be
defined for each MOBY channel (ASM or write/read device).
See also
Data structures of FC 45 (Page 2-6)
FC 45
Function manual, Release 03/2006 , J31069-D0167-U001-A2-7618
Parameters Data type
Params_DB INT
Params_ADDR INT
Permissible range
2 to 32767 Parameter data block number for a
MOBY channel (write/read device)
0, 300, 600,*... Address pointer in the parameter data
block to the start of a UDT 10
Description
2.2 Configuration scheme
Description
2-5