Performing A Back-Up; Basic Settings In The Operating System; Operating Modes - Siemens SIMATIC RF310M Operating Instructions Manual

Commissioning

5.4 Basic settings in the operating system

5.3.3

Performing a back-up

Set the operating mode to "Supervisor". See Chapter Operating modes (Page 24)
Select "Start > Settings > Control Panel > Total Recall".
1. Select the "Create Profile" button.
2. Select "Auto Restore" and then confirm with the "-->" button.
3. Select "Default Backup" and confirm this with the "Create Profile" button.
Reaction: The backup is started. On completion, a message window appears with
information about the success of the back-up.
4. Click "Finished" to return to the application.
All changes, e.g. a new password for the operating system, are now stored in the back-up
secure against power failure.
5.4 Basic settings in the operating system
5.4.1

Operating modes

Operating modes
The SIMATIC RF310M device has two operating modes:
1. "Supervisor mode"
Configuration and settings for the SIMATIC RF310M reader.
2. "User mode"
Preset mode. The user can only use the installed service and
Changing the operating mode
You can change the operating mode in the "Security Level" settings. "Start > Security" is
used for changeover:
Figure 5-3
24
test applications. The start menu functionality is restricted.
Operating mode
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader