Siemens SIMATIC RF310M Operating Instructions Manual page 67

The "current area"
If "Complete" is not checked, the area is displayed that is specified in the fields "Address"
and "Length".
You can reach the individual addresses using the input pen. If you change the values, they
will have a green background. The green background remains until the data are
transferred/written to the transponder. The color green therefore indicates that the actual tag
data differs from the values visible in the editor.
All other data areas of the tag are shown against a white background.
If you have selected the user area as the memory area, you must specify its length in the
field "Length of user area" [
using "Tag status".
Transponder-specific memory areas
Different memory areas exist in accordance with the tag standard.
● RF300
● ISO15693
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
– USER FRAM:
User data area. Freely available. Its size or presence is specific to the tag.
– CONFIG:
Configuration data. Relevant for service purposes only.
– OTP EEPROM:
EEPROM memory for user data. This area can also be used as an "OTP" memory
(One Time Programmable). The function "Write OTP" is used for this purpose.
– USER ISO
User data area. Freely available. Its size or presence is specific to the manufacturer.
– OTP ISO
User data memory. This area can also be used as an "OTP" memory (One Time
Programmable). The function "Write OTP" is used for this purpose.
⑪
]. You can also call the length of the tag-specific user area
RF-MANAGER RF310M software
9.3 Application mode "Mobile"
67