The Functions In The "Help" Menu - Siemens SIMATIC RF310M Operating Instructions Manual

Settings under "Auto-Save Filename"
Under "Auto-Save Filename" you can define whether the same file with the same name is
always updated when scanning tags, or whether new files are saved in each case.
Figure 8-21
● "READ.XML"
● "Tag_xxx.XML"
"READ.XML" is set as the default value.
8.7

The functions in the "Help" menu

Using "Help > About" you can obtain information on the following points:
Figure 8-22
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
Auto-Save Filename
If the setting "READ.XML" is selected, the same file READ.XML is always updated each
time tag data is read.
If the setting "Tag_xxx.XML" is selected, a new file with the name TAGxxx.XML is created
each time tag data is read. "xxx" is replaced by the ID of the read tag.
If a tag with the same ID is read again, the corresponding file is overwritten.
"About RF310M" window
SIMATIC RF310M software
8.7 The functions in the "Help" menu
57