Lcd Message List - Olivetti d-Color P116 Service Manual

7.4.1 LCD Message List

When the printer detects an irrecoverable error, it displays a service call error in the LCD like the
one given below:
Service call
nnn: error
Note! "nnn" is an error code.
When a service call error is issued, an error code is displayed in the lower line of the LCD,
accompanied by the relevant error information. Be sure to make a note of this error information
(numeric values representing an address, etc.) and communicate it to the related departments,
since such information will be required for the subsequent trouble analysis/solution. The error
codes and their meanings, as well as the related remedial methods, are given in Table 7-1-1.
Display on Operator Panel
LOAD %MEDIA_SIZE% IN MANU-
AL TRAY
LOAD IN TRAY AND PRESS ON-
LINE SWITCH
DUPLEX REQUEST
LOAD IN MANUAL
DUPLEX REQUEST
LOAD %MEDIA_SIZE%/
%MEDIA_TYPE% AND PRESS ONLINE
SWITCH
%ERRCODE%:%TRAY% MEDIA
MISMATCH
LOAD %MEDIA_SIZE%/
%MEDIA_TYPE% AND PRESS ONLINE
SWITCH
%ERRCODE%:%TRAY% SIZE
MISMATCH
Y110260-4
Table 7-1-1 Operator Alarm (1/7)
Ready
Attention
LED LED
On Off
Manual paper feed is required.Manually insert the paper shown
by %MEDIA_SIZE%.
The nuit of paper size in Custom: The unit specified for menu
setting is used if no unit is specified by the driver. Where the
driver specifies a unit, the unit is used for display.
Paper size displays in Custom mode: "<width>x<length><unit>"
ex) 210x297mm
8.5x11.0inch
On Off Paper feeding is reccomended because the print of back
sides(odd number pages) is finished during the Manual
Duplex print.
On Off
Off Blink The media type in the tray and the print data do not
match. Load mmmmmmm/pppppp paper in tttttt tray (It
takes a while until the status disappears after you have
closed the tray and the lever lifted.)
(tttttt:TrayName,mmmmmm:PaperName.pppppp:MediaTypeName)
Error 461 : Tray
Paper size displays in Custom mode:
"<width>x<length><unit>"
ex.) 210x297MM
8.5x11.0INCH
As a user pressed ONLINE key, the printer could ignore
this error at the just printing job.
Off Blink The size of paper or media type in the tray does not
match the print data.
Load paper in tray
(It takes a while until the status disappears after you
have closed the tray and the lever lifted.)
Error 461 : Tray
The paper size displaying form of the custom mode is
the same as above.
As a user pressed ONLINE key, the printer could ignore
this error at the just printing job.
d-Color P116 Service Manual
Description
Code
nnn
Error
(ON-
LINE)
Error
(ON-
LINE)
Error
461
Error
461
137