Setting The Input Setup - Sherwood RD-7503 Operating Instructions Manual

RD-7503(A) 2008.11.4 1:45 PM 페이지 45

SETTING THE INPUT SETUP

When selecting the items other than NAME, PARENTAL LOCK, EDIT LOCK MODE
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press the ENTER
button.
�When selecting the menu of page 2 or page 1.
• Press the CURSOR UP(▲)/DOWN(▼) buttons to select
"GO TO NEXT ~ ", then press the ENTER button.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
3.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
• This menu allows you to make the various settings
depending on how to use the input sources connected to
this receiver.
Example: When selecting the VIDEO 1
■Note :
• Depending on the input source, some items other than DC
TRIGGER cannot be selected.
45