Osd Menu Settings - Sherwood RD-7503 Operating Instructions Manual

RD-7503(A) 2008.11.4 1:45 PM 페이지 39

OSD Menu Settings

• The OSD (On-Screen Display) menu is a setting menu that is displayed on the monitor TV and allows you to perform the setup
procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it
rarely needs to be changed later.
The OSD menu consists of 6 main menus ; system setup, input setup, speaker / room EQ setup, CH level setup,sound parameter
and multi room setup. These menus are then divided up into various sub-menus.
■Note:
• The OSD menu and the momentary OSD can be displayed via the (composite) VIDEO MONITOR OUT only.
■Navigating through the OSD menu
• The explanations here assume you are using the buttons on the remote control when performing the OSD menu operation.
However, you can use the buttons on the front panel as well.
The buttons on the front panel correspond to those on the remote control as shown below.
1.
Turn the menu screen on.
• The main menu will be shown.
• To turn the menu screen off, press this button again.
2.
Select the desired menu using the CURSOR UP(▲)/DOWN(▼) buttons.
MULTI
39