Setting The Input Setup - Sherwood R-774 Operating Instructions Manual

R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 64

SETTING THE INPUT SETUP

VIDEO 1
BACK
V2/iPOD
VIDEO 3
BT
CD
TAPE
F.AUX
TUNER
EXT.IN
When selecting the items other than Re-Name
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press the CURSOR
RIGHT(▶) button to enter the setting menu.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item, then press the CURSOR
RIGHT(▶) button to enter its setting menu.
■Note :
• Depending on the input source, some items other than DC Trigger, etc. cannot be selected.
3.
Press the CURSOR UP(▲)/DOWN(▼) buttons to set the selected item as desired, then press the ENTER
button.
• When the CURSOR LEFT(◀) button is pressed on the setting menu, the previous menu will be returned to.
• When adjusting the AV Sync, use the CURSOR UP(
All manuals and user guides at all-guides.com
NEXT
▲
)/DOWN(
64
• This menu allows you to make the various settings
depending on how to use the input sources connected to
this receiver.
Example: When selecting the VIDEO 1
Re-Name
BACK
HDMI Assign
Component Assign
Audio Assign
Video Mode
Audio Mode
Video Scaling
AV Sync
HD Audio
DC Trigger
▼
) buttons only.
NEXT