Recording - Sherwood Newcastle R-965 Operating Instructions Manual

RECORDING

• The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs or USB can be heard but
cannot be recorded.
• The volume, channel level, tone(bass, treble) settings, etc. have no effect on the recording signals.
Recording with TAPE MONITOR
Select the desired input as a recording source
1
except TAPE MONITOR.
or
• You can select "VID 6" on the page 2 of "AUD 1" on
the remote control.
Dubbing from video components onto
VIDEO 1
Select the desired input of VIDEO 2~ 6 as
1
a recording source except VIDEO 1.
or
• You can select "VID 6" on the page 2 of "AUD 1" on
the remote control.
Dubbing the sound and image signals
separately onto VIDEO 1
Example) When dubbing the VIDEO 2 image signal and
the CD sound signal separately onto VIDEO 1.
Select CD as an sound recording source.
1
or
POWER ON
STANDBY
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
POWER ON
STANDBY
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
POWER ON
STANDBY
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
Image source
Sound source
Start recoding on the component
2
connected to TAPE MONITOR.
Start play on the desired input.
3
• For tape monitor function, refer to "TAPE MONITOR
function" on page 24.
• When the AUX IN/OUT jacks are connected to audio
recording component such as MD recorder, tape
deck, etc., in the same manner, recording with AUX
can be performed.
Start recording on the component
2
connected to VIDEO 1.
Start play on the desired input.
3
• The audio and video signals from the desired input will be
dubbed onto the VIDEO 1and you can enjoy them on the
TV set and from the speakers.
• When the VIDEO 2(/ROOM 2) IN/OUT jacks are
connected to video recording component such as video
deck, etc., in the same manner, recording with VIDEO 2
can be performed.
(If this is the case, be sure to deactivate the ROOM 2
function and to set the VIDEO 2 OUT to On. For details,
refer to "When selecting the VIDEO 2 OUT" on page 57.)
Select VIDEO 2 as a image recording
2
source with performing "When selecting
the CURRENT VIDEO" procedure on
page 55.
38
Image source
Sound source