Sherwood Newcastle R-965 Operating Instructions Manual page 36

Manual presetting
• You can store up to 30 preferred stations in the
memory.
Tune in the desired station with auto or
1
manual tuning.
Note :
• When performing manual presetting with the remote
control, first be sure to turn off the OSD manu
display.
Select the desired preset number (1~30) and press the (ENTER/)MEMORY button.
3
POWER ON
STANDBY
AUD2
SCH.M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
Repeat the above steps
4
memorize other stations.
Tuning to preset stations
• After selecting the tuner as input source, select the desired preset number.
+
or
POWER ON
STANDBY
AUD2
SCH.M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
to to
POWER ON
STANDBY
AUD2
SCH.M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
36
Press the (ENTER/) MEMORY button.
2
STANDBY
or
• "MEMORY" is flickering for several seconds.
• When using the NUMERIC buttons on the remote
control.
Examples) For "3" :
3
within 2 seconds
For "15" :
1
For "30" :
0
• The station has now been stored in the memory.
• When using the NUMERIC buttons, the station is
stored automatically without pressing the
(ENTER/)MEMORY button.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If "MEMORY" goes off, start again from the above
step .
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned
off, are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations, etc.
• When using the NUMERIC buttons on the remote
control.
Examples) For "3":
3
within 2 seconds
For "15":
1
For "30":
0
POWER ON
AUD2
SCH,M E.TA
PTY S E.PTY
MEMO P.SCA
TUNE+ PSET+
TUNE- PSET-
PAGE2
5
5