Connect The Sensor Cable - Hach TSS sc User Manual

3.3

Connect the sensor cable

Figure 5 Connect the sensor plug to the controller
Personal injury hazard. Always lay cables and hoses so that they are straight and do not pose a
tripping hazard.
1. Unscrew the protective caps from the controller socket and the cable plug and retain
them.
2. Pay attention to the guide in the plug and push the plug into the socket.
3. Tighten the nut by hand.
Note: Extension cables are available in various lengths (refer to
accessories).
Maximum cable length 100 m (328 ft).
C A U T I O N
Section 7 Replacement parts and
Installation
15