Panasonic AW-UE150WP Operating Instructions Manual page 78

Web screen operations (continued)
9.
Zoom [Zoom]
[T]: Use this to adjust the zoom (magnification) in
the "Tele" direction.
[W]: Use this to adjust the zoom (magnification) in
the "Wide" direction.
[T] [W]
Use this to enable or disable the digital zoom.
[D_Zoom]
Use this to enable or disable the digital extender.
[D-Ext.]
Use this to adjust the zoom (magnification) to 1.0x.
[×1.0]
10.
Focus [Focus]
[Far]: Use this to adjust the focus in the "Far"
direction. It does not work during automatic
adjustments.
[Near]: Use this to adjust the focus in the "Near"
direction. It does not work during automatic
adjustments.
[Far] [Near]
Use this to switch between auto and manual
focusing. When Auto is selected, the focus is
adjusted automatically.
[Auto]
When this is pressed while the focus is being
adjusted manually, the focus will be temporarily
adjusted automatically.
[O.T.AF]
It does not work during automatic adjustments.
Focus is automatically adjusted in the area
touched.
[Touch AF]
11.
Control pad and its buttons
To adjust the image in the horizontal or vertical
direction (panning or tilting), left-click the pad and
the buttons.
It is possible to operate with the central grid
pattern in the dragged state, with the speed of the
pan/tilt increasing as it approaches the outside of
the pad.
12.
Brightness [IRIS]
[+]: Operates in stages in the direction of iris opening. It
does not work during automatic adjustments.
[–]: Operates in stages in the direction of iris closing. It
does not work during automatic adjustments.
[+] [–]
Use this to switch the iris adjustment between auto and
manual. When Auto is selected, the picture brightness is
adjusted automatically.
[Auto]
13.
Speed [Speed]
Use this to select the speed at which the pan, tilt, zoom,
focus, and brightness operations are to be performed.
[Fast] [Slow]
14.
Preset [Preset]
When a preset thumbnail is clicked, the camera
moves to face towards a preset position that was
registered beforehand.
You can select Home and Preset1 to Preset100.
Switches the page of the displayed preset
thumbnails.
[1] - [12]
Move to home position.
[Home]
Registers the current state to the selected preset
position.
[SET]
Deletes the selected preset position settings.
[DELETE]
15. Scene [Scene]
Click scene1-scene4 to switch the shooting
mode.
[Scene]
16.
Full‑screen display button
Display the image in full-screen mode.
To return to the live screen [Live], press the [Esc] key on
the personal computer while the image is displayed in
full-screen mode.
The aspect ratio of the displayed image will be adjusted
according to the monitor size.
17.
Snapshot button
Capture a snapshot (single still image), and display it in a
separate window. Selecting [Save] underneath the image
allows you to save the image to a personal computer.
<NOTE>
• The following settings may be necessary.
In the Internet Explorer menu bar, click [Tools] - [Internet Options] -
[Security] tab, select [Trusted Sites], and then click [Sites]. Register
the camera's address under [Websites] in the window that appears.
• Depending on the network environment, for example, if snapshot
capture takes longer than a certain amount of time, the image may
not appear.
• If [JPEG transmission(1)] - [JPEG transmission(3)] are all set to
[Off], the image captured with the snapshot button will be black.
78