Maintenance Screen [Maintenance] - Panasonic AW-UE150WP Operating Instructions Manual

Web screen configurations (continued)

Maintenance screen [Maintenance]

Among the various maintenance operations performed on this screen
are system log checks, system version upgrading and initialization of the
unit.
The Maintenance screen consists of five tabs: [System log], [Product
info.], [Status], [Default reset] and [Back up].
System log screen [System log]
„ „
A maximum of 30000 system logs can be stored in the unit's internal
memory.
When this maximum number has been exceeded, the old logs are
overwritten successively by the new logs.
The logs are cleared when the unit's power is turned off.
<NOTE>
• The maximum number of entries that can be checked on the system
log screen is 100. Entries beyond 100 can be checked by obtaining the
log using CGI commands.
No.
The running numbers of the system logs are displayed here.
Time & date
The times and dates when the logs were generated are displayed
here.
The 24-hour system is used to display this information.
Description
Details of the system logs are displayed here.
For further details on the system logs, refer to page 129.
Product information screen [Product info.]
„ „
The versions of the unit's software can be checked on this screen.
The [Model no.], [MAC address], [Serial no.], [Firmware version] and
other information about the unit is displayed.
Model no.
Display the unit's model number.
MAC address
Display the unit's MAC address.
Serial no.
Display the unit's serial number.
Firmware version
CPU Software ‑ Interface
Display the software version of the interface.
CPU Software ‑ Camera Main
Display the software version of the camera unit.
CPU Software ‑ Servo
Display the software version of the servo.
CPU Software ‑ Network
Display the software version of the network.
EEPROM ‑ Interface
Display the version of the setup data for the interface.
FPGA - Lens
Display the FPGA version of the lens.
FPGA ‑ AVIO
Display the FPGA version of the AVIO.
FPGA ‑ Com
Display the FPGA version of the communication.
Activation
Display information on the activated function.
Viewer software installation counter
The number of plug-in viewer software applications which have been
installed automatically from the unit is displayed by this counter.
Firmware file
Update the firmware.
For details on how to update, see "Updating the firmware"
(→ page 123).
Status
Display the current status of the unit.
122