Sharp AR-350 Operation Manual page 81

Remove the paper from the stapler
10
compiler.
Raise the lever at the end of the staple
11
box.
Return the lever to its original position.
12
Insert the staple box.
13
Unlock the staple unit lever and return
14
the staple unit to face down.
Close the front cover.
15
NOTE
Execute test printing in the staple sort mode to
ensure that stapling is performed properly.
If the top staple is bent,
be sure to cut it out. If
bent staples remain, a
staple jam may occur.
Push the staple box until
it clicks into place.
FINISHER
5
5-13