Sharp AR-350 Operation Manual page 54

CUSTOM SETTINGS
Press the [OK] key.
6
When using the operation panel with touch panel:
Press the [CUSTOM SETTINGS] key when
1
the printer screen is displayed to display
the custom settings menu screen.
Touch the key of the desired item to display
2
its setting screen.
CUSTOM SETTINGS
DISPLAY
TOTAL COUNT LIST PRINT
RECEIVE MODE
TRAY SETTINGS ADDRESS
KEY OPERATOR PROGRAMS
For details of each setting item, see the description
on and after the next page.
CUSTOM SETTINGS
TRAY SETTINGS
TYPE / SIZE
TRAY 1 PLAIN / 8 X11 1 /
2
TRAY 2 PLAIN / AUTO-INCH
TRAY 3 RECYCLED / AUTO-INCH
Depending on the setting item, additional item setting
keys may be displayed and page switching keys
may be displayed.
If a check box is displayed for an item, the item can
be set by touching the key to display a check mark
( ) in the box.
3-6
" " will be displayed to
the right of selected item,
and the setting will be
registered. Depending on
the setting item,
additional item selection
and registration operation
may be needed. In this
case, use the or key
to select an item and
press the [OK] key to
register it. To set another
item, press the [BACK/C]
key and repeat steps 5
and 6.
Any print jobs held in the
printer and any job
currently transmitted to
the printer will be printed
in the former custom
setting conditions.
CLOCK
FAX DATA
OK
PRINT COPY FAX
1/2
When setting is complete, press the
7
[MENU] key to return to the basic screen.
NOTE
If the [BACK/C] key is pressed after each setting
is complete, the display that has called the setting
will appear again. If selection of a number is
mistaken during setting operation, press the [BACK/
C] key to correct the selected number.
Touch the desired setting on the setting
3
screen of the desired item and touch the
[OK] key.
CUSTOM SETTINGS
TRAY SETTINGS
TYPE / SIZE
PRINT
TRAY 1 PLAIN / 8 X11 1 /
2
TRAY 2 PLAIN / AUTO-INCH
TRAY 3 RECYCLED / AUTO-INCH
To set another item, repeat steps 2 and 3.
To finish the setting operation, touch the
4
[EXIT] key.
OK
COPY FAX
1/2