Sharp FO-6700 Operation Manual page 78

Making Copies
Checking copy jobs in memory
You can display the status of copy jobs in memory by following the
steps below. You can also cancel copy jobs with this procedure.
1
Press the MEM. STATUS key (flip
up the Rapid Key overlay) and then
the 1 key.
COPY STATUS will appear in the
display.
2 Press the # key or the * key to scroll
through the list of copy jobs. The time
the original was scanned into memory
will appear in the display, together
with the 3-digit memory number
assigned to the job. To cancel a copy
job, press the CLEAR key and then
the START key while the copy job
appears in the display.
3
When you have finished checking the
list, press the STOP key twice to
return to the date and time display.
76
MEM.STATUS
1
W
or
STOP STOP