Sharp FO-6700 Operation Manual page 193

NO CONF. FUNC
NO PAPER
NO RELAY FUNC
ONHOOK DIAL MODE
PAPER JAM
POWER SAVE MODE
RCVD CONF. FAX
RCVD PRINT HOLD FAX
RCVD RELAY REQUEST
Confidential transmission was cancelled because
the receiving machine does not have a
confidential function, a confidential passcode is
not programmed in it, its memory is full, or it is not
a Sharp model.
This message will be followed by one of the paper
sources in parentheses, and informs you that the
paper source is out of paper (UPPER indicates
the upper cassette, and LOWER indicates the
lower cassette). If no paper source is indicated, all
paper sources are out of paper.
A relay request has been denied because the
other machine does not have a relay broadcast
function, its memory is full, or it is not a Sharp
machine.
The SPEAKER key has been pressed and the fax
machine is waiting for you to dial.
The printing paper is jammed. See the following
section, Clearing Paper Jams.
Power Save Mode is on. See Power Save Mode in
Chapter 5.
A confidential fax has been received in memory.
Print the fax as explained in Confidential
Operations in Chapter 5.
The Print Hold function has been turned on and
you have received one or more faxes in memory.
Print out the faxes as explained in Print Hold in
Chapter 5.
Your fax machine has received a Relay Broadcast
request and is transmitting the requested
document to the end receiving machines. See
Relay Broadcast in Relay Request in Chapter 5.
Messages and Signals
191