Sharp LC-M3700 Operation Manual page 57

Settings and Adjustments (Continued)
Picture Flip
Adjustable range
Default
Normal
Mirror
Upside Down
Rotate
Language
Function
Adjustable range
Default
INPUT2 Select
Function
Adjustable range
Default
Input
Output
Note:
ID No. Setting
Function
Adjustable range
Default
Note:
Enlarge: (see page 61 for details.)
Function
Adjustable range
Default
↓ (After adjustment)
Adjustable range
(When set to "2 × 2")
Default
(When set to "2 × 2")
Adjustable range
(When set to "3 × 3")
Default
(When set to "3 × 3")
Panel Protection Cover
Function
Adjustable range
Default
Note:
56
US
Normal/Mirror/Upside Down/Rotate
Normal
Normal image
Mirror image
Upside down image
Rotated image
Selects display language setting.
Japanese, English, German, French, Spanish
English
Selects INPUT2 terminal use.
Input/Output
Input
Using as Input
Using as Output
(This setting cannot be switched when INPUT2 is currently being displayed.)
Assigns ID numbers to monitors connected in a daisy chain (see page 37), using
RS-232C cables.
0 - 255
0
The numbers 1 to 255 are available for ID numbers.
(If "0" is set, the system regards this as the state where no ID number is set.)
Although numbers up to 255 can be used for monitor IDs, the number of
connectable monitors varies depending on the length of RS-232C cables and the
installation environment.
Use \/| to move between digits, and '/" to raise or lower digit values.
Sets the image enlargement ratio, and the part of the original image to be enlarged.
Off/2 × 2/3 × 3
Off
1 - 4
1
1 - 9
1
Setting for panel protection cover. Be sure to set this item when using the cover.
Attached/Detached
Detached
Set to "Attached" when using the optional panel protection cover (commercially
available in the future).