Sharp LC-M3700 Operation Manual page 42

IDSL······ The parameter of this command sets the ID number indicating the monitor subject to the
next command.
Example:
← The next command is for the monitor with ID number=2.
IDSL0002
← Searching for monitor with ID number=2.
WAIT
← Found monitor with ID number=2
OK 002
← Set volume of monitor with ID number=2 to 30
VOLM0030
← Processing
WAIT
← OK response from monitor with ID number=2
OK 002
← Set volume to 20
VOLM0020
← The volume of the monitor with ID number=1
OK 001
IDLK······ The parameter of this command sets the ID number indicating the monitor subject to all
subsequent commands.
Example:
← Following commands are for the monitor whose ID number is "2".
IDLK0002
← Searching for monitor with ID number=2.
WAIT
← Found monitor with ID number=2
OK 002
← Set volume of monitor with ID number=2 to 30
VOLM0030
← Processing
WAIT
OK 002
← Set volume of monitor with ID number=2 to 20
VOLM0020
WAIT
OK 002
← Canceling ID number setting
IDLK0000
← Canceling IDLK
WAIT
← Cancelation complete
OK 002
VOLM0010
← The volume of the monitor with ID number=1 (the one directly connected
OK 001
IDCK······ Provides screen display of the ID number currently assigned to a monitor, and the ID
number currently set for IDLK (if any).
Example:
(After executing IDLK0002)
IDCK0000
ID:001 IDLK:002
IDCK000+
WAIT
ID:001 IDLK:002
ID:002 IDLK:002
ID:003 IDLK:002
ID:004 IDLK:002
(the one directly connected to the PC) is set to
20.
to the PC) is set to 10.
← (Parameter has no meaning)
← Returned response. The ID number is also displayed on the
monitor screen.
← Repeater control
(If a command is used with repeater control, ID designation using
IDSL or IDLK is canceled.)
PC Operation (Continued)
The IDSL command is
effective only once, for the
immediately succeeding
command.
The IDLK command
remains effective until it is
canceled, or power is shut
off.
Continued on the next page.
41
US