Bundling Cables - Sharp LC-M3700 Operation Manual

I Cables and cords connected to the back of the monitor can be bundled using the supplied
cable clamp and cable binders. This will prevent stray or disorganized cables at the back of
the monitor.
"Rear view
"With terminal cover closed
How to use the supplied terminal cover mounting screws and flat washers
» Use terminal cover mounting screws to firmly fix the terminal cover if difficult to close after
bundling the cables.
To external devices
Cable binder
Wrap the cable binder Put the thinner end of
around the bundle of cable binder through
cables. the hole as shown, and
tighten appropriately.
Bundle of cables
To external devices

Bundling Cables

Cable binder
Wrap the cable binder Put the thinner end of
around the bundle of cable binder through
cables. the hole as shown, and
tighten appropriately.
Bundle of cables
29
US